Top 5 best thermal glue 2020

Top 5 best thermal glue 2020

Buying the right thermal paste and using it correctly will greatly improve the temperature and capacity of the CPU or GPU. If you use the wrong type of thermal paste and the wrong method will lead to worse performance. So this article will introduce you to some types of thermal compound, as well as how to use it properly. This article is intended to help beginners build computers, but if you are experienced, you are sure to learn some new things.

  • Assemble your own computer, build a desktop computer (P1): Choose hardware

Where is the best thermal grease?

  • What is thermal glue?
  • Use thermal paste properly
  • Remove and reuse thermal paste
  • The best non-conductive thermal paste 2020

    • 1. Arctic MX-4: Best carbon-containing thermal sealant
    • 2. Noctua NT-H1: Excellent thermal paste for overclocking
    • 3. Arctic Silver 5: Thermal compound contains 99.9% silver
    • 4. Thermal Grizzly Kryonaut: The best high-end ceramic TIM
    • 5. Gelid Solutions GC Extreme
    • 6. Gelid Solutions GC-2
    • 7. Kingpin Cooling KPx
  • The best liquid metal thermal cooling 2020

    • 1. Thermal Grizzly Conductonaut: The best thermal grease for overclocking GPUs and CPUs

What is thermal glue?

Thermal paste is also known as thermal compound, thermal paste or simply TIM. This gray material often conducts heat away from the CPU or GPU and dissipates it into radiators and coolers. Typically, you’ll see temperatures drop more than 10 degrees, which depends on the quality of the heatsink compound and the components of the computer.

Although the computer has a radiator or cooler, you should still use thermal paste to improve overall cooling performance.

There are many different types of thermal paste including silicon, metal, ceramic and carbon. Thermal paste is the most efficient thermal conductive compound, but it also has capacitance. Therefore, you need to be careful not to spill glue onto the metal contacts on the motherboard.

  • Things to know when choosing to buy mainboard

Ceramic heat sinks do not contain any metal and therefore do not conduct electricity. This thermal paste is cheaper, but its effect is not the same as metal thermal paste. However, it is easier to use and safer, still giving good results so that’s why it’s popular.

Silicon thermal paste is used for thermal pads, which you can place between the heat sink and the processor. This type of thermal paste is easy to use but not as effective as other thermal paste.

Note, you should not use adhesive type thermal paste because it will stick the components together. You will have trouble changing the radiator after a certain time.

Use thermal paste properly

There are many ways to use thermal paste, and although most will give the same results, you should make sure not to use too much or too little thermal paste. In short, the most common method is the “pea” or “dot” method, you just need to pour glue on the middle of the surface. Thermal paste will spread evenly when you put the radiator pressure on it. The rest depends on the cooler and how the airflow is managed in the computer case.

Alternatively, another way to use thermal paste for the CPU is to pour the glue into a line along the surface. Some people pour the glue in an X or spiral shape, which is kind of excessive because you will use more glue than necessary. Either way, always remember, don’t use too little or too little thermal paste.

Some thermal grease has a special tool such as a brush used to evenly comb the glue. Except for the use of liquid metal thermal paste, otherwise you don’t need to spread the compound evenly.

Remove and reuse thermal paste

Many of you wonder if it’s easy to remove old thermal glue, the answer is very simple. You only need to use 99% isopropyl alcohol solvent, this is the most effective tool to remove substances from the CPU, radiator and processor surface.

You just need to carefully pour a little solvent on the part you want to clean, wait for a few minutes and then wipe it with a clean cloth. After some time, you should remove the CPU cooler, remove the old thermal paste and use the new glue. The truth is that even after a year or two, performance will not improve at all. In fact, cleaning, cleaning your computer will be more beneficial than reusing thermal paste.

  • Clean up: An effective way to help your computer “longer”

If you have free time, you can change the radiator components when cleaning your computer, but you should make changes after a period of more than five years because short periods are not necessary.

The best non-conductive thermal paste 2020

1. Arctic MX-4: Best carbon-containing thermal sealant

Arctic Thermal Adhesive MX-4

Arctic MX-4 is one of the most popular thermal compound, it’s cheap and easy to use due to the syringe design. Moreover, it does not contain any metal components so does not conduct electricity. After pouring the thermal paste, you can place the cooler as it does not require a fixed time. Although Arctic MX-4 performs routine tasks almost perfectly, it cannot be used for overclocking.

2. Noctua NT-H1: Excellent thermal paste for overclocking

Noctua NT-H1 thermal grease

Compared with Arctic MX-4, Noctua NT-H1 can make CPU cooler by 2 degrees. The process of using Noctua NT-H1 is quite easy, though this thermal paste is drier and thicker than conventional thermal compound. Moreover, it also requires no fixed time. Noctua NT-H1 TIM is a bit cheaper than Arctic MX-4, but it also contains less glue, enough for more than 15 uses. This glue conducts heat very well even when the CPU is operating at high power.

3. Arctic Silver 5: Thermal compound contains 99.9% silver

Arctic Silver thermal paste 5

An alternative to the previous thermal paste is Arctic Silver 5 with better performance thanks to 99.9% silver splint. Although it contains a silver component, this thermal paste is considered a ceramic TIM and the manufacturer still recommends that you be careful not to spill the glue onto other components of the computer.

The efficient thermal conductivity silver makes the CPU work better at high performance. However, this type of thermal paste takes a bit of time to fix, meaning that after pouring the glue, it takes a few hours to install other components. There are several types of ceramic TIMs on the market that contain rubble diamonds, but you should not use them because they are easy to wear.

4. Thermal Grizzly Kryonaut: The best high-end ceramic TIM

Thermal paste Thermal Grizzly Kryonaut

Thermal Grizzly Kryonaut is the best non-conductive thermal paste available and is one of the most expensive. It costs twice as much as Noctua NT-H1 but contains only 1 gram of glue. This thermal paste is mainly used for people building computers.

Despite placing money, people still have expensive iron sentences. With the type of 12.5W / mk, this is the best thermal conductive ceramic thermal paste and does not conduct electricity. And it requires no fixed time, is easy to use and effectively cools with temperatures up to 3.4 degrees lower than Arctic Silver 5 and Noctua NT-H1.

5. Gelid Solutions GC Extreme

Gelid Solutions GC Extreme
Gelid Solutions GC Extreme

Gelid Solutions GC Extreme is another premium thermal paste that helps keep computers maintained at low temperatures and stable clock speeds.

GC Extreme has 3 sizes. You can buy standard 1 gram tubes, 3.5 grams larger tubes or 10 gram tins. This will be a convenient option for those who build or repair PCs and need to replace thermal paste regularly.

6. Gelid Solutions GC-2

Gelid Solutions GC-2
Gelid Solutions GC-2

Gelid Solutions GC-2 is a budget-friendly option. At the same price as GC Extreme, you get almost 7 times the amount of the product. However, in actual testing, GC-2 is not really impressed by the performance.

Someone who has tried many types of thermal paste and doesn’t care about maximum performance will see the incredible benefits of this thermal paste. However, for typical users or PC builders, this thermal paste will not be the best choice.

7. Kingpin Cooling KPx

Kingpin Cooling KPx
Kingpin Cooling KPx

The Kingpin Cooling KPx thermal compound is slightly more special than the other options on the list. The first thing users notice is that the sticker is green instead of white or gray. Next is the extremely thick binder. In fact, you should heat the glue a little before using.

KPx thermal paste shows excellent performance in tests. However, the price of this compound is a bit more expensive than similar products in the product line (but still cheaper than Kryonaut, Conductonaut and GC Extreme).

The best liquid metal thermal cooling 2020

1. Thermal Grizzly Conductonaut: The best thermal grease for overclocking GPUs and CPUs

Thermal grease Thermal Grizzly Conductonaut

This thermal paste requires a bit of expertise and care to use as it conducts electricity. First, the heat sink needs to be thoroughly cleaned with isopropyl alcohol solvent before using the glue.

After that, you need to apply a little glue and spread the glue with the available brush.Thermal Grizzly Conductonaut has all the tools to use the easiest process, you just need to follow the instructions. Remember that you must not use it on aluminum heat sinks because liquid metal can damage and leave black stains.

Depending on the cooling device, heat sink and the rest of the computer rig, Thermal Grizzly Conductonaut thermal paste can reduce temperatures by more than 10 degrees. Therefore, lower temperatures will allow you to overclock the GPU and / or the CPU more, providing much better performance.

  • Guide to overclocking CPU

With 73 W / mk, Thermal Grizzly Conductonaut is the best thermal paste on the market today. Those who want to push their performance to the maximum will definitely use this metal thermal paste. Just be careful and take the time to use it and you won’t be disappointed.

When you need to use thermal paste for a new cooler / heat sink or replace the old thermal paste from your old CPU, you should choose high quality TIM. If you just want to choose a reliable and efficient thermal paste, use Arctic MX-4. For overclocking, use Noctua NT-H1 or Arctic Silver 5. For best results, use Thermal Grizzly, which is a bit expensive but worth it if you want to push performance to the highest level. Kryonaut is safe and easy to use while Conductonaut should probably be handled by experienced users.

See more:

  • You have to use thermal paste properly?
  • DIY laptop heat sink base is super simple
  • 5 ways to cool down, cool, cool laptop simple, effective


Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *