Replace wheels, lazang is the trend to help “pet driver” to look more unique. However, to ensure safety, when changing the wheels for cars, a few things to note.
Use centering cushion
A good rule of thumb to help keep your vehicle from vibrating is to ensure that the shafts are not deviated from the shafts. Because of that, all car manufacturers meticulously work to keep the hole centered correctly. However, the centering hole will be larger than the center of the sewing machine. The reason is that each manufacturer has a different wheel parameters and it is also not possible to produce a different type of rim.
Read more: 4D car floor linings
Attention should be paid to the centering cushion
In this case, the excess due to the centering hole larger than the sewing axis sẽ will be filled with the centering element. The cushion will be made of plastic or metal. The load and torque forces will not be absorbed by the cushion but will turn into friction between the rim and the roller. Because of these effects of centering cushions, you need to pay close attention to details when Replace wheels for cars due to details will ensure your car does not shake when moving.
Reference: Tips to increase the life of car tires
Pay attention to the diameter of the divider
this is a Parameters you need to note when replacing lazang. The diameter of the divider is the diameter of the bolt circle associated with the sewing machine. Therefore, the diameter of the divider and stitching machine must be equal to match. If the diameter of the split ring is smaller or larger than the stitching ring, the vehicle cannot be fitted. In addition, you must also choose a rim with the same number of bolts as the bolt on the sewing machine.
The number of rim holes must be equal to the number of bolts on the sewing machine
See also: How to distinguish good automobile tires from fake tires
Note the horizontal eccentricity
The eccentricity is the distance between the center face and the flange to the sewing machine. If you pay close attention to the rim surface you can see the specifications regarding the horizontal eccentricity. The lateral deviation will be negative if the flange attached to the sewing machine is indented from the center and vice versa will be positive. From there, if the horizontal deviation is lower than the standard specification it will cause the wheel to protrude out and if too high will cause the wheel to touch the body and other parts of the vehicle.
Standard deviations will help the wheel protrude out
If you have chosen a rim with a lower lateral deviation than the vehicle, you can still fix it by attaching a cushion. However, this solution will limit the ability to transfer power and affect the suspension pretty much.
See also: When to turn automobile tires
Pay attention to the width and diameter of the wheels
Rim width means the distance between two surfaces in contact with the rim of the tire. Rim diameter is the inner ring diameter in contact with the rim of the tire. If lazang want to increase stability when cornering and keep good grip, use a large diameter rim.
So you know what you need Note when replacing wheels, car wheels. Hopefully, the above notes will help you choose and replace the most satisfactory lazang.
Looking for more information:
- Automotive undercarriage paint has no effect
- Car leather sewing factory
- 5D car ceiling
Zhou En
