The computer automatically disconnects the USB connection is a common occurrence. It will be inhibitory when you are copy data, files from USB to computer or vice versa, experiencing this USB auto-disconnection. Many cases of automatically disconnecting USB also cause files in the copying process to fail, resulting in corrupted files or unable to install after copying is complete. In the case are install Windows 7 using USBIf you encounter this situation, it is easy to cause your computer to hang, conflict with Windows. To use tricks such as installing Windows 7 with USB, or copying and receiving data between the USB and the computer, you should block the computer from automatically disconnecting your USB. Detailed instructions to block the computer from automatically disconnecting your USB will be in the following article, please refer to.
How to block the computer from automatically disconnecting your USB:
Step 1: In the Desktop view, click Start or Windows key choose Control Panel.
Step 2: Choose Next Hardware and Sound.
Step 3: Here you notice the icon of the battery capacity and the charging socket. Click select Power Options.
Step 4: At section Balanced press select Change plan settings.
Step 5: Continue to choose Change advanced power settings.
Step 6: At this step dialog box Power Options appear. Go to section USB Settings . Click next will see USB selective suspend setting and the battery usage and charging modes are both in mode Enabled.
Step 7: Click on Enabled and switch back Disabled to prevent your computer from automatically disconnecting your USB drive. Finally press Apply > OK to save your action.
After performing this procedure, you have successfully blocked the computer from automatically disconnecting your USB connection. Users no longer worry about automatically disconnecting your USB while transferring data.
The old computers and laptops without USB 3.0 often have the problem of copying and copying files between the USB and the computer slowly. If you only have USB 2.0 ports, you should use TeraCopy file copying tips to speed up data copying, especially when copying files that weigh a few GB. Not just large files, you can use the way Copy files with TeraCopy in any situation, every time copy files to USB, phone, memory card. Because after installing Tera Copy on your computer, this software will integrate the heavy copy file via TeraCopy right in the right mouse interface, you just need to right click on the file and choose to use TeraCopy to transfer data. stop it.
Another common error with USB users is the USB error that does not allow copying files over 4GB. With this error, it is very difficult to copy large data, such as .iso files to install Windows for example. If you encounter this situation, please fix it immediately USB error does not allow copying files larger than 4GB follow the instructions of ElectrodealPro. The above tips on USB we hope to support you to copy files, transfer data on the fastest USB.