As mentioned above, there are many causes Error not able to login 192.168.1.1It could be because this is not the default gateway address on your router (router), the router is turned off or because the LAN or WiFi card is disabled, the firewall is blocking your network connection, etc. . To fix the error that cannot access 192.168.1.1, please continue to refer to the following article of ElectrodealPro.
Instructions to fix the error that cannot log in 192.168.1.1
Fix the error that could not login 192.168.1.1
Option 1: Check the default IP address
To fix the 192.168.1.1 login failure, the first solution is to check if 192.168.1.1 is the default IP address on your router.
Follow the steps below:
Step 1: Press Windows + R to open the Run window, then type cmd enter it and press Enter.
Step 2: On the Command Prompt window, run the following command:
Find the item Default Gateway and see if 192.168.1.1 is set as the default gateway address. If yes and the login error 192.168.1.1 still occurs, please refer to some ways to fix it below.
Method 2: Turn on your router
Find and tap power button on the back of your router to turn off the router, wait about 1 minute, then press again power button to re-open the router and check if the 192.168.1.1 login error persists.
Method 3: Activate the network card
Step 1: Right-click the network icon located in the system tray, and select Open Network and Sharing Center.
Step 2: On the window displayed on the screen, in the left pane you select Change adapter settings.
Step 3: Make sure the network card you are using is activated. If the network card is disabled you will see the option is set to Disable. Right-click on the network card you are using, and select Enable to re-activate.
Method 4: Update the network driver
Step 1: Press Windows + R to open the Run window, then type devmgmt.msc then press Enter to open the Device Manager window.
Step 2: On the Device Manager window, find and open the item Network adapters.
Step 3: Right-click on the network card driver you are using, and select Update Driver Software ….
Step 4: Choose Search automatically for updated driver software.
Step 5: Wait until Windows has finished updating the network card driver.
Step 6: Follow the same steps to update other network card drivers.
Finally try to check if the login is 192.168.1.1 or not.
The above article ElectrodealPro just instructed you how to fix the error that cannot login 192.168.1.1. Hopefully the above article has provided you with useful information. If you use a Totolink modem and have a login error, you should refer How to fix the error 192.168.1.1 Totolink here. Good luck.