For many people, especially technicians and office workers, USB drives are indispensable. But sometimes USB drives often have things “sick” that are very strange and difficult to diagnose. The majority of users often experience USB errors that do not show capacity, cannot open on the computer, … and even though they have done everything, the error in the USB cannot be overcome. In this case, it is best to reload the firmware to the USB.
Reload the USB firmware, it sounds very difficult and not easy to do, but you will probably think again after watching this tutorial, specifically as follows.
Step 1: Access this address and download the latest version of ChipGenius software, this is the software to “read” information on your USB.
Extract the package and launch the file “ChipGenius.exe” to use immediately without installation.
Step 2: After booting, ChipGenius will automatically detect and display information of the connected USB.
Please pay attention to the information in the VID, PID number, Device Vendor name and Controller Vendor name. As an example in the picture, these parameters are 13FE, 4100 and Phison, respectively.
Step 3: Now you can access USB firmware supply page, then enter the USB VID and PID number in the search box.
The website will provide a suitable firmware for your USB drive. This result is in the rightmost column of UTILS.
Find the correct information line for your USB drive. There are a number of UTILS results that will mount links for you to download. But some are not. Now click on this link https://flashboot.ru/files/
Enter the name of the memory chip manufacturer in the search box and press ENTER, then go to the first link and download the USB Flash tool.
Step 4: Unzip the package and launch the tool, wait for it to automatically recognize the USB key and now you just need to click on the “Start” button to wait for the loading process to complete.
Note: Depending on the brand of the USB manufacturer, the flash tool interface will differ, but basically the same way.
Very simple, right?